Products
Professional 4 sided molder
Standard Model：M521
Features:-
➢Professional solution for processing Medium cutting capacity strip,
MDF strip, HDF strip, floor, doors, Solid wood furniture and Square
boards.
Heavy cutting gear box Nourishment wheel via a universal joint and the gearbox, ensure no power loss. Feeding extremely smooth, powerful driving force, high feedind accuracy.
Every spindle is tested and assembled in dust free room, with SKF bearing on the double end before finished. Absolute smooth running of the spindle ensure the finished surface without any roughness.
Rapidly flip-short feeding device This mechanism effectively enhance the smooth feeding of short material, auxiliary feed wheel has a drive power to make feeding more brisk. Feeding off the wheel, easy to replace the tool and calibrated.
Moveable working table on the last bottom spindle, Making easy working on changing cutters.
Parameters:-
MODEL
M521
Working width
25-210
Working thicknes
8-140
Working table length
1700
Feeding speed (r/min)
6-36
Spindle diameter (mm)
Φ 40
Main spindle revolution
6500
Air source pressure (Mpa)
0.6
1st Lower Shaft
5.5kw/7.5HP
Right vertical spindle
5.5kw/7.5HP
Left vertical spindle
5.5kw/7.5HP
1st Upper Shaft
5.5kw/7.5HP
2nd Upper Shaft
5.5kw/7.5HP
2nd Lower Shaft
Feeding beam lifting
0.55kw/0.75HP
Feeding
4kw/5.5HP
total power
39.55kw/54.3HP
1st Lower Shaft
Φ 125
Right Vertical spindle
Φ 125-Φ 180
Left vertical spindle
Φ 125-Φ 180
1st Upper Shaft
Φ 125-Φ 180
2nd Upper Shaft
2nd Lower Shaft
Φ 125-Φ 200
Feeding wheel diameter (mm)
Φ140
Dust outlet diameter
Φ140