1. The machine control interface is designed to be user-friendly, and the operator can be put on the job with simple training, no skilled workers are needed. The machine moves quickly and efficiently, helping you to achieve a leap in production capacity

2. Pre-milling device, the side of the board chipping phenomenon, residual burrs, side steps for secondary processing, so as to make the sealing surface more clean and flat, to ensure that the amount of glue applied to the glue surface is small and more uniform, so that the sealing effect is more perfect. Better integrity and aesthetic

3.Laser edge sealing function, independent and independent intellectual property rights of the laser edge sealing system, laser edge sealing with no trace sealing, open and ready to use, energy efficient and so on.

4.Multi-channel automatic tape change function, no tape prompt automatically switch another group of edge banding into, without manual intervention, but also according to the sweeping information automatically match the edge banding, optional double channel, four channels, six channels and other specifications configuration

5.Pressing and pasting device to improve the ability of pressing together the glue line, you can get a smaller glue line, each pressing and pasting wheel with scraping device, you can eradicate the glue layer adhering to the surface of the pressing wheel, keep the surface of the pressing wheel clean.

6.Smaller board spacing, sealing speed of 30m/min can still quickly cut off the front and back sealing tape, more stable and smooth; horizontal high-speed cutting, to ensure high efficiency at the same time, the perfect solution to the problem of knocking the board, falling corners.

7.Pneumatic retired knife roughing device, to meet the thick and thin belt fast switching, stable quality, convenient and fast, improve production capacity.

8.It is used to trim the excess edge material on the top and bottom part of the edge band of the processed board. It adopts the structure of automatic tracking by the die and high frequency and high speed motor to ensure the flatness and smoothness of the top and bottom part of the trimmed board.

9.Break the traditional rack and screw mechanism can not keep up with the bottleneck, high-speed follow, tracking the fastest speed can reach 80 m / min.

10.The scraping device can meet the fast switching of thick and thin strips, and also can make multiple scraping, with better scraping effect and higher capacity. Two sets of scraping edge can meet the different thickness of the sealing strip to get a satisfactory trimming arc, and reduce the frequency of machine adjustment.

11.Use cotton polishing wheel to clean up the processed board and make the sealing end face smoother by polishing; waxing and polishing unit to improve the brightness of the sealing edge and better sealing effect, independent servo control polishing wax dosage to avoid secondary cleaning