Products
HMI High Speed 4 Side Moulder
Standard Model: SKG-230JH
Features:-
The newly developed High Speed Computerized 4-side moulder from Shen Ko is excellent for long wood materials machining, such as construction materials, wall boards and finger jointer materials, etc. Equipped with jointer device and cross type chain feed conveyor table, the machine not only produces extra fine surface of product, but also dramatically increases machining efficiency.
Without jointer device, the timber with clear cutter mark.
Equip jointer device, the timber without cutter mark under 80 M/min processing.
Jointer Device
Jointer device allows the cutter service time to be extended. It also ensures no cutting marks exist on the machining surfaces, while creating extra fine surface finishes.
Jointer Device
Jointer device allows the cutter service time to be extended. It also ensures no cutting marks exist on the machining surfaces, while creating extra fine surface finishes.
First upper feeding roller
The reinforced top feed roller for the first spindle is equipped with special device to eliminate wood jamming problem.
Deformation Analysis of the mechanical structure
The machine structure is subject to Finite Element Analysis, allowing the machine to achieve the optimal stability during running and high quality of machining.
Parameters:-
MODEL
SKG-230JH
Working width min.~max.
30~230 mm
Working height min.~max
10~150 mm
Infeed table length
1.2 M
Spindle power
20 HP / 25 HP (Opt. 30HP)
Feeding power
20HP / 25HP
Speed of spindle
10~120 M/min
Diameter of spindle
40 mm (Opt. 50 mm)
Spindle speed
6,000 RPM
Tool diameter of first bottom spindle
125~180 mm
Tool diameter of vertical spindle
125~200 mm
Tool diameter of horizontal spindle
125~230 mm
Adjustment range of straightening table and edge-joint
10 mm
Adjustment of vertical spindle
50 mm
Adjustment of horizontal spindle
30 mm
Diameter of feeding roller
200 mm x ø45 mm
Width of steel feed roller
25 mm
Width of steel feed rollers opposite left spindle
20 mm
Width of rubber feed roller
50 mm
Max. cutting capacity for 1st bottom spindle
10 mm
Max. cutting capacity for 2st right vertical spindle
10 mm
Copyright © 2024 - 2026 - avimpex.co.in Made with ❤️ by PrimeWebX.com