Products
Professional 4 sided molder
Standard Model：M518
Features:-
➢Professional solution for processing Soft wood strip, Medium cutting capacity strip,
MDF strip, HDF strip, Glued laminated timber and Square boards
The universal chainless transmission for feeding materialsis precise, strong, long life, no need for maintenance for years.
Front and rear press plate can be adjusted respectively, although the big variation in wood thickness, also work pieces can be firmly pressed down on the working table.
Every main shaft must strictly be tested for dynamic balance, ensuring the smooth running of the cutter shaft.
Double-deck working table on left and right spindle, guaranteed working verticality.
Parameters:-
MODEL
M518
Working width
25-180
Working thicknes
8-130
Working table length
1500
Feeding speed (r/min)
6-36
Spindle diameter (mm)
Φ 40
Main spindle revolution
6500
Air source pressure (Mpa)
0.6
1st Lower Shaft
4kw/5.5HP
Right vertical spindle
4kw/5.5HP
Left vertical spindle
4kw/5.5HP
1st Upper Shaft
5.5kw/7.5HP
2nd Upper Shaft
2nd Lower Shaft
4kw/5.5HP
Feeding beam lifting
0.55kw/0.75HP
Feeding
3kw/4HP
total power
29.05kw/39.5HP
1st Lower Shaft
Φ 125
Right Vertical spindle
Φ 125-Φ 160
Left vertical spindle
Φ 125-Φ 160
1st Upper Shaft
Φ 125-Φ 160
2nd Upper Shaft
2nd Lower Shaft
Φ 125-Φ 180
Feeding wheel diameter (mm)
Φ140
Dust outlet diameter
Φ140