➢Professional solution for processing Hard wood strip, floor,
doors and large cutting capacity strips..
Rapidly flip-short feeding device This mechanism effectively menhance the smooth feeding of short material, auxiliary feed wheel has a drive power to make feeding more brisk. Feeding off the wheel, easy to replace the tool and calibrated.
Every spindle is tested and assembled in dust free room, with SKF bearing on the double end before finished. Absolute smooth running of the spindleensure the finished surface without any roughness.
Feed returned material and emergency stop button at the rear of the machine so as to facilitate operation and adjustment.
Feeding frequency inverterDigital display, easy operation, energy saving, reduction of mechanical transmission wear.
Parameters:-
MODEL
M623E
Working width
25-230
Working thicknes
8-100
Working table length
1970
Feeding speed (r/min)
6-36
Spindle diameter (mm)
Φ 40
Main spindle revolution
6500
Air source pressure (Mpa)
0.6
1st Lower Shaft
5.5kw/7.5HP
Right vertical spindle
5.5kw/7.5HP
Left vertical spindle
5.5kw/7.5HP
1st Upper Shaft
7.5kw/10HP
2nd Upper Shaft
5.5kw/7.5HP
2nd Lower Shaft
5.5kw/7.5HP
Feeding beam lifting
0.55kw/0.75HP
Feeding
4kw/5.5HP
total power
39.55kw/54.3HP
1st Lower Shaft
Φ 125
Right Vertical spindle
Φ 125-Φ 180
Left vertical spindle
Φ 125-Φ 180
1st Upper Shaft
Φ 125-Φ 180
2nd Upper Shaft
Φ 125-Φ 180
2nd Lower Shaft
Φ 125-Φ 200
Feeding wheel diameter (mm)
Φ140
Dust outlet diameter
Φ140
About us
AVIMPEX is a leading Indian company specializing in the manufacturing and exporting of high-quality woodworking machinery and accessories.